Item talk:Q58064

{"@context": "https://schema.org", "@type": "CreativeWork", "additionalType": "USGS Numbered Series", "name": "Drilling, construction, geophysical log data, and lithologic log for boreholes USGS 142 and USGS 142A, Idaho National Laboratory, Idaho", "identifier": [{"@type": "PropertyValue", "propertyID": "USGS Publications Warehouse IndexID", "value": "ds1058", "url": "https://pubs.usgs.gov/publication/ds1058"}, {"@type": "PropertyValue", "propertyID": "USGS Publications Warehouse Internal ID", "value": 70189208}, {"@type": "PropertyValue", "propertyID": "DOI", "value": "10.3133/ds1058", "url": "https://doi.org/10.3133/ds1058"}], "inLanguage": "en", "isPartOf": [{"@type": "CreativeWorkSeries", "name": "Data Series"}], "datePublished": "2017", "dateModified": "2017-08-28", "abstract": "Starting in 2014, the U.S. Geological Survey in cooperation with the U.S. Department of Energy, drilled and constructed boreholes USGS 142 and USGS 142A for stratigraphic framework analyses and long-term groundwater monitoring of the eastern Snake River Plain aquifer at the Idaho National Laboratory in southeast Idaho. Borehole USGS 142 initially was cored to collect rock and sediment core, then re-drilled to complete construction as a screened water-level monitoring well. Borehole USGS 142A was drilled and constructed as a monitoring well after construction problems with borehole USGS 142 prevented access to upper 100 feet (ft) of the aquifer. Boreholes USGS 142 and USGS 142A are separated by about 30 ft and have similar geology and hydrologic characteristics. Groundwater was first measured near 530 feet below land surface (ft BLS) at both borehole locations. Water levels measured through piezometers, separated by almost 1,200 ft, in borehole USGS 142 indicate upward hydraulic gradients at this location. Following construction and data collection, screened water-level access lines were placed in boreholes USGS 142 and USGS 142A to allow for recurring water level measurements.Borehole USGS 142 was cored continuously, starting at the first basalt contact (about 4.9 ft BLS) to a depth of 1,880 ft BLS. Excluding surface sediment, recovery of basalt, rhyolite, and sediment core at borehole USGS 142 was approximately 89 percent or 1,666 ft of total core recovered. Based on visual inspection of core and geophysical data, material examined from 4.9 to 1,880 ft BLS in borehole USGS 142 consists of approximately 45 basalt flows, 16 significant sediment and (or) sedimentary rock layers, and rhyolite welded tuff. Rhyolite was encountered at approximately 1,396 ft BLS. Sediment layers comprise a large percentage of the borehole between 739 and 1,396 ft BLS with grain sizes ranging from clay and silt to cobble size. Sedimentary rock layers had calcite cement. Basalt flows ranged in thickness from about 2 to 100 ft and varied from highly fractured to dense, and ranged from massive to diktytaxitic to scoriaceous, in texture.Geophysical logs were collected on completion of drilling at boreholes USGS 142 and USGS 142A. Geophysical logs were examined with available core material to describe basalt, sediment and sedimentary rock layers, and rhyolite. Natural gamma logs were used to confirm sediment layer thickness and location; neutron logs were used to examine basalt flow units and changes in hydrogen content; gamma-gamma density logs were used to describe general changes in rock properties; and temperature logs were used to understand hydraulic gradients for deeper sections of borehole USGS 142. Gyroscopic deviation was measured to record deviation from true vertical at all depths in boreholes USGS 142 and USGS 142A.", "description": "Report: v, 21 p.; Appendices A-C", "publisher": {"@type": "Organization", "name": "U.S. Geological Survey"}, "author": [{"@type": "Person", "name": "Schusler, Kyle", "givenName": "Kyle", "familyName": "Schusler"}, {"@type": "Person", "name": "Twining, Brian V. btwining@usgs.gov", "givenName": "Brian V.", "familyName": "Twining", "email": "btwining@usgs.gov", "identifier": {"@type": "PropertyValue", "propertyID": "ORCID", "value": "0000-0003-1321-4721", "url": "https://orcid.org/0000-0003-1321-4721"}, "affiliation": [{"@type": "Organization", "name": "Idaho Water Science Center", "url": "https://www.usgs.gov/centers/idaho-water-science-center"}]}, {"@type": "Person", "name": "Hodges, Mary K.V.", "givenName": "Mary K.V.", "familyName": "Hodges"}, {"@type": "Person", "name": "Mudge, Christopher", "givenName": "Christopher", "familyName": "Mudge"}], "funder": [{"@type": "Organization", "name": "Idaho Water Science Center", "url": "https://www.usgs.gov/centers/idaho-water-science-center"}], "spatialCoverage": [{"@type": "Place", "additionalType": "country", "name": "United States", "url": "https://geonames.org/6252001"}, {"@type": "Place", "additionalType": "state", "name": "Idaho", "url": "https://geonames.org/5596512"}, {"@type": "Place", "additionalType": "unknown", "name": "Idaho National Laboratory"}, {"@type": "Place", "geo": [{"@type": "GeoShape", "additionalProperty": {"@type": "PropertyValue", "name": "GeoJSON", "value": {"type": "FeatureCollection", "features": [{"type": "Feature", "properties": {}, "geometry": {"type": "Polygon", "coordinates": [[[-113.75, 44.25], [-112.25, 44.25], [-112.25, 43.3], [-113.75, 43.3], [-113.75, 44.25]]]}}]}}}, {"@type": "GeoCoordinates", "latitude": 43.775, "longitude": -112.99999999999999}]}]}